BillieBars, Ford F-150 (2015-2020)


**Note: Ford Raptors may have a wider bed, email us or take measurements as described on the custom sets page! 


Designed and fabricated in PA; our goal was to design a set of bed bars that work with a tonneau cover and create the strongest most versatile mounting system for our trucks. The thought was to have a universal design to mount anything from RTT’s, bikes, skis & snowboards, surfboards, lights, CB antennas, and more in any fashion the owner wants to.  

We created the strongest bed bar mounting system out there that works with a cover. Designed in CAD utilizing finite element analysis.


WHATS INCLUDED (2 bars, 4 brackets, and hardware): 

Cross Bars:

Cross bars are made from 80mmx40mm (3.15” wide x 1.57” tall) 6560-T6 aluminum double wide t-slot rails and anodized black. There are two slots top and bottom and one front and back, for a total of 6 t-slots per cross bar. All the t-slots run the length of the bar, so you can mount anything anywhere. The cross bars utilize drop in t-slot hardware (links below) and supplied by us. Typical t-slot nuts will accommodate an M8-1.25 thread and slide perfectly to any location you need.



Uprights are laser cut from a high strength steel, CNC bent, then TIG welded and powder coated in a durable black wrinkle finish.  The uprights mount directly to the truck bed lip using our universal clamp system.



All external hardware is high strength stainless steel.  There are 4 security bolts (TT40 bit) that hold each cross bar to the upright. Just remove the bolts to the bars and the cover can flip open with the uprights still mounted. 

Bed width for the 2015-2020 F150's were measured at 62.5 inches. Please confirm inside to inside bed rail dimensions, and that your top bedside caps are flat and level with the ground before ordering!

These may fit newer models as well, but bed width has yet to be confirmed. Shoot us an email and we can get you squared away! 


** TT40 bits are now included with your Billie purchase**


BillieBars 8" High Option Features:

  • Underside of bar rests roughly 6.5" above the bed rail (compared to our standard brackets 3.5")
  • Top of bar rests roughly 8" above bed rail 
  • Two welded gussets per bracket from base to cradle  
  • Black wrinkle powder coat 
  • Allows up to 2 BillieBars Molle Panels per side 
  • Compatible with all of the current BillieBars Accessories